Sunday, 7 June 2020

Ubitx mic



Well the cable arrived, and I fitted it at long last it looks a dream 

soldering the wires was fun as they are tiny enamelled strands of wire but I got there in the end 

Wednesday, 27 May 2020

New Toy arrived



OK I have been thinking that I need to invest in a small CNC machine to build prototype circuit boards to for my hobby.

So a few months back I was looking to pay about £100 -£150 at most for a machine to learn with, so I started to research in what they call hobby CNC machines and there are many types of them out there to choose now days !

Things I had to take into consideration with the machine
  • value for money
  • space to fit it 
  • can it be upgraded
  • limitations 
After a few weeks of looking into CNC machines I found there are a lot of hobby machines that I liked but at the moment I only have a 500x500 space to use at this time, so I started to look into the group of CNC machines that are mainly made in China the machine models are called  1610,2418, 3018, 3020, 3040, 6040. 

The model numbers are actually the bed size for example 1610 is a 16x10cm bed size and so on. some of these machines are in my price range and look to be able to upgrade and 3d print parts to assist with making stuff.

After a bit more research I chose to go with the 3018 as it was just in my price range again there was a few to choose from there is a 3018, 3018 pro and a 3018 pro max, 

  • The standard has 20x20 aluminium sections for the main frame and some braces to help hold the frame work and 
  • The pro has 20x40 side sections and thick plastic uprights and front sections and is apparently more rugged 
  • The pro max has the side screens to help limit the mess and protect more from a bit braking in use
I ended up paying £160 pro version at the time from Amazon as I thought it looked nicer and its more rugged it arrived in less than a week.

When you open the box it's all in pieces to assemble with the help of the instruction manual, looking at the manual it's a bit basic on the building instructions of the kit, so I would recommend using YouTube to guide you if you have never done anything like this before.

This  is a helpful 

Take your time getting it right especially the screws for the x and y-axis movement to the motors, if its slightly off it will cause problems with its operation when in use.






Tuesday, 12 May 2020

Taking the mic

Happy that the printer seems to be working OK, I decided to clear out some part spools I have sat around and taking up space, I decided to print some radio parts for my radio projects.

I had a look through thingiverse and found some bits to print for my ubitx v4 radio I'm slowly starting to make into a portable radio, for going mobile with it.

All his info for the build is here
 

I came across a mic that makes use of the original parts in the kit, I downloaded the files and found the ppt button to need a lot of support whatever way you try to print it, so I set up a few ways to try to print it, in the end the best print I got was with it on the side.

I think it worked quite well, what do you think?



This is my video of my case

A cable has been ordered for the finish of the build 


Monday, 11 May 2020

Bye bye BLTouch

I have had probe on my printer for years now and never had an issue, last year I built an enclosure out of lack tables and I found things with the original sensor going strange. I had to keep adjusting the offsets to the bed I was damaging nozzles and digging into the bed.

My suspicion was at the time the cheap 3D touch was worn out or the hats was affecting it, when I had some money I purchased an original antclabs bltouch v3 sensor 

It arrived in January and once the time arose the new sensor got fitted, and tested and for some reason it still didn't work as well as it could have so it was time to start looking at the code.

I downloaded marlin 2.0.5.3 and went through a lot of YouTube videos and wrote down notes on how to use the new marlin and in fact the vs code that I haven't used before

it was then I got into adjusting the code to work the to work for my ender3, I did struggle at points as things  have moved around in the files, it took many attempts to get the code to work and I still could not get it to work correctly.

At 9pm last night I decided for now to go back to a standard z stop switch and change the firmware to suit 

Tuesday, 5 May 2020

New Hotend


(left bigtreetech mk8 all metal and right is a stock mk8)


ok as part of my radio fun I also have a 3d printer, its and ender 3 that is modified in a few ways.

I have been trying out different all metal hot ends to find one that is a sensible price as there are some very good all metal hot ends that are very expensive and there are as i have found some very cheap all metal hot ends that are not worth entertaining.

The cheapest one I have found that works is the bigtreetech mk8 all metal hot end, it is what it says it is and it is a close comparison to an all metal hot end made by an American company that is twice the price of one of this one.

Here is the link and make sure you choose the mk8 version

It's a good quality hot end for the price that will fit directly to my carriage plate with no issues and works perfectly with my direct drive design.

The main thing that make this hot end different to a standard hot end is the heat sink only allows the ptfe tube to go in a short, as way then the bore is machined just wide enough to take a 1.75mm filament. compared to a stock mk8 hot end that the tube seats right on to the back of the nozzle.

Then the heat brake fits into a socket and a grub screw holds it into the heat sink, this allows little chance of the filament causing a blockage 

Why change to an all metal hot end you ask?
  • I'm currently printing with a lot of petg filament that needs to have a temp of up to 250 degrees and I have found I'm getting issues with the filament blocking in the bottom of the ptfe tube, when removing it I find the bottom of the tube deformed and scorched, this is because I'm at or close to its maximum working temperature of ptfe tube. 
  • When exceeding the max working temperature it can cause the ptfe tube to melt and give off poisonous fumes! (the thermistors are not 100 percent accurate)
  • When refitting the ptfe tube end needs to be cut absolutely straight and clean or it to will cause more blockage and clog issues (trust me I have found out)
An alternative that I didn't try with the stock hot end was Capricorn tube, it can apparently cope with a bit more heat compared to the standard ptfe tube and some point in the future I  intend to push my printer to print other filaments that need to go up to temperatures above Capricorn tube. 


Sunday, 3 May 2020

Amazon did good





Well 1350 on Sunday and the screen arrived brilliant service, and brilliant packaging, try installing the ubitx information tomorrow when I get time.

Saturday, 2 May 2020

Amazon for the Win

After my disappointment before the weekend I decided I would try trusty Amazon, as im a prime member things get delivered next day (in this pandemic things don’t always arrive same day but they are usually within a week and it keeps you updated)

So I ordered a Nextion 3.2 inch screen and it says it will arrive on Sunday let’s wait and see.